=========================================================== ATコマンド集 =========================================================== 0.ATコマンドの構文 ----------------------------------------------------------- .. csv-table:: ATコマンドの構文 :header: "Command", "内容" :widths: 15, 30 "AT+=?","コマンド確認用（？）" "AT+?","変数内容表示" "AT+=<...>","変数に代入" "AT+","コマンド実行" 1.ATコマンド 基本形 ----------------------------------------------------------- .. csv-table:: ATコマンドの構文 :header: "Command","内容","戻り値内容" :widths: 15,50, 20 "AT","テスト用ATコマンド",">AT" "AT+RST","リセットコマンド","Boot文字が見える" "AT+GMR","バージョン確認用コマンド","バージョンが表示される" "AT+GSLP","Deap-Sleapモードに移行","(確認中)" "ATE","エコー有り無し指定？","(確認中)" "AT+RESTORE", "Factory Reset","(確認中)" "AT+UART", "シリアル通信設定（速度等）","(確認中)" "AT+UART_CUR", "シリアル通信設定","(確認中)" "AT+UART_DEF","シリアル通信設定","(確認中)" "AT+SLEEP", "Sleep mode","(確認中)" "AT+RFPOWER", "Set RF TX Power","(確認中)" "AT+RFVDD", "RF TX Power according to VDD33","(確認中)" 2.ATコマンド WiFi周りのコマンド ----------------------------------------------------------- :station: クライアントモード(子機) :softAP: アクセスポイントモード(親機) :station+softAP: クライアント＆アクセスポイントモード .. csv-table:: ATコマンドの構文 :header: "Command","内容","戻り値内容" :widths: 15,50,20 "AT+CWMODE","WiFiモード選択(station/softAP/station+softAP)","( )" "AT+CWMODE_CUR","WIFI mode(sta/AP/sta+AP)Won’t save to Flash","( )" "AT+CWMODE_DEF","WIFI default mode(sta/AP/sta+AP)Save to Flash","( )" "AT+CWJAP","アクセスポイントに接続する","( )" "AT+CWJAP_CUR","Connect to AP, won’t save to Flash","( )" "AT+CWJAP_DEF","Connect to AP, save to Flash","( )" "AT+CWLAP","接続可能なアクセスポイントを表示","( )" "AT+CWQAP","アクセスポイントへの接続を切る","( )" "AT+CWSAP","softAP使用時の詳細設定","( )" "AT+CWSAP_CUR","Set configuration of ESP8266 softAP Won’t save to Flash.","( )" "AT+CWSAP_DEF","Set configuration of ESP8266 softAP Save to Flash.","( )" "AT+CWLIF","softAP使用時にAPに接続されているIPを表示","( )" "AT+CWDHCP","Enable/Disable DHCP, [@deprecated]","( )" "AT+CWDHCP_CUR","Enable/Disable DHCP, won’t save to Flash","( )" "AT+CWDHCP_DEF","Enable/Disable DHCP, save to Flash","( )" "AT+CWAUTOCONN","Connect to AP automatically when power on","( )" "AT+CIPSTAMAC","Set mac address of ESP8266 station[@deprecated]","( )" "AT+CIPSTAMAC_CUR","Set mac address of ESP8266 station Won’t save to Flash.","( )" "AT+CIPSTAMAC_DEF","Set mac address of ESP8266 station Save to Flash.","( )" "AT+CIPAPMAC","Set mac address of ESP8266 softAP[@deprecated]","( )" "AT+CIPAPMAC_CUR","Set mac address of ESP8266 softAP Won’t save to Flash.","( )" "AT+CIPAPMAC_DEF","Set mac address of ESP8266 softAP Save to Flash.","( )" "AT+CIPSTA","Set IP address of ESP8266 station, [@deprecated]","( )" "AT+CIPSTA_CUR","Set IP address of ESP8266 station Won’t save to Flash.","( )" "AT+CIPSTA_DEF","Set IP address of ESP8266 station Save to Flash.","( )" "AT+CIPAP","Set IP address of ESP8266 softAP Won’t save to Flash.","( )" "AT+CIPAP_CUR","Set IP address of ESP8266 softAP Save to Flash.","( )" "AT+CIPAP_DEF","Set IP address of ESP8266 softAP, [@deprecated]","( )" 3.ATコマンド TCP/IP及びUDP周りのコマンド ----------------------------------------------------------- .. csv-table:: ATコマンドの構文 :header: "Command","内容","戻り値内容" :widths: 15,50,20 "AT+CIPSTATUS", "コネクション状態の表示","( )" "AT+CIPSTART", "TCP/IP及びUDPへの接続先設定＆接続開始","( )" "AT+CIPSEND", "データー送信モード","( )" "AT+CIPSENDEX", "Send data, if or '\0' is met, data will be sent","( )" "AT+CIPSENDBUF", "Write data into TCP-send-buffer","( )" "AT+CIPBUFRESET", "Reset segment ID count","( )" "AT+CIPBUFSTATUS", "Check status of TCP-send-buffer","( )" "AT+CIPCHECKSEG", "Check if a specific segment is sent or not","( )" "AT+CIPCLOSE", "コネクションを切断","( )" "AT+CIFSR", "ローカルIPの表示","( )" "AT+CIPMUX", "マルチコネクションモードの設定","( )" "AT+CIPSERVER", "サーバーモードとして設定","( )" "AT+CIPMODE", "転送モードの設定","( )" "AT+SAVETRANSLINK", "Save transparent transmission link to Flash","( )" "AT+CIPSTO", "TCPのタイムアウト時間の設定","( )" "AT+CIUPDATE", "Upgrade firmware through network","( )" "AT+PING", "PINGコマンド","( )" "AT+CIPDINFO","Show remote IP and remote port with '+IPD'","( )" | | | | | | | | | | | 提供 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ArtifactNoise. .. image:: img/ANlogoMark.png :alt: ArtifactNoise :scale: 18% :target: http://artifactnoise.com 管理情報 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :初版: 2015/08/09 :作成者: Yuta kitagami :連絡先: kitagami@artifactnoise.com :twitter: @nonNoise